Telephone: 1-519-863-2462
DirectLine to Order Desk
1-800-265-9354
Fax: 1-519-863-2386
Toll Free Fax: 1-800-823-1502
5 Palmer Street E., Norwich, Ontario Canada
DirectLine to Order Desk
1-800-265-9354
Fax: 1-519-863-2386
Toll Free Fax: 1-800-823-1502
5 Palmer Street E., Norwich, Ontario Canada
Commercial Gaskets
ALL GASKETS CAN BE ORDERED IN ANY SIZE
| Product |
|---|
| {catName} |
| {catName} |
Profiles
{itemProfile}
Order
Commercial Gasket - Order Form (PDF 65kb)
To select the proper gasket for replacement, first, determine if the gasket to be replaced is magnetic or compression (non-magnetic). next, determine if the bottom of the gasket has a conventional flange held in place by screws of flange strips, or if it is of the snap in style (with an 'arrow' on the bottom to permit the gasket to be inserted into a retainer strip).If the gasket you are replacing is magnetic, use a replacement gasket with the proper clearance dimensions as indicated for each cross section. Also check to be certain the magnet in the replacement gasket is at the outer edge or is centered in the same manner as the gasket being replaced. If you are replacing a compression (non-magnetic) gasket, the gasket cushion should be compressed a minimum of 1/8" (0.3cm) to a maximum of 3/16" (0.5cm) to obtain the most efficient seal. The replacement gasket does not necessarily have to look the same as the gasket being replaced.
The important factor is for it to provide a seal.